4
Series 1000 Operators Manual
1.4
Using the keypad
The left and right buttons select a
parameter to be viewed or
modified. When one of these
buttons is pressed, the next
parameter in the scroll list is
selected, scrolling forwards or
backwards.
In the short scroll these buttons
select which of a short list of
parameters, consisting of setpoint,
output, segment (and event if the controller is configured with any), is on the lower
display.
The up and down buttons adjust
the value of the parameter
selected. When the button is
pressed it is changed by one at
first but then at an increasing
rate. This makes it easy to make
large changes quickly.
Auto/man button. Used to place
the instrument in automatic or
manual modes. See section 1.5,
Auto and manual modes.
Star button. This button is used to
access the alternate functions of
the keypad as shown below the
buttons. The star button is
pressed and held and the other
button then pressed to achieve
the desired programmer function.
The star button is also used to unlatch latched alarms when the alarm level is
displayed in the long scroll, to show remaining number of repeats and acknowledge
failure to start a corrupt program. The star key is also used for initially configuring
the programmer/controller.
1
2
OP
FGH
Series 3000 Programmer
HOLD
START
STOP
PROG
SP
SEG
EVNT
