7
POWER UNIT SPECIFICATIONS
IMPORTANT
Exceeding any of the maximum recommended tractor or power unit specifications
CAN result in damage to this product and
WILL void all FFC Attachments warranties.
DESCRIPTION SPECIFICATIONS
Weight of Power Unit without Planer
11,000 lbs. maximum
Operating Capacity of Power Unit
’s
loader
4,500 lbs. maximum
Lift Capacity of Power Unit’s loader
9,000 lbs. maximum
Hydraulic Pressure Output
3,400 psi. maximum
Front or Rear Ballast
As required to maintain full power unit stability.
(Note
the shipping weight on page 15, then see the operator’s
manual(s) for your power unit, loader, and quick-attach for
ballasting needs.)
PLANER MOUNTING
SAFETY FIRST!! READ AND UNDERSTAND THE SAFETY INSTRUCTIONS (pages 2-4 of this
manual) BEFORE BEGINNING ANY PLANER MOUNTING
1. Place this product on a firm, level surface that is large enough to safely accommodate this product, your
power unit and all workers involved in the mounting process.
2. Refer to the operator’s manual(s) for your power unit, loader, and quick-attach and follow the mounting
instructions contained therein.
3. Carefully raise the loader and cycle the tilt cylinders to check clearances and to verify that all mounting
procedures have been successfully completed.
IMPORTANT Lubricate all grease fittings before connecting this product to your power unit’s hydraulic
system. Refer to PLANER MAINTENANCE on page 10 and follow the instructions.
PLANER HYDRAULIC CONNECTION
SAFETY FIRST!! READ AND UNDERSTAND THE SAFETY INSTRUCTIONS (pages 2-4 of this
manual) BEFORE BEGINNING ANY PLANER HYDRAULIC CONNECTION
1. Disconnect the hydraulic hose quick couplers from one another and attach the quick couplers to your
power unit as per the instructions in your power unit’s operator’s manual.
2. Carefully raise the loader and cycle the tilt cylinders to check hose clearances and to check for any
interference.
3. Cycle the hydraulic cylinder(s) on this product several times from fully retracted to fully extended until all air
has been completely removed from the cylinder.
NOTICE: When shipped, the hydraulic cylinder on this product contained air or an air-fluid mixture.
Failure to remove all the air from the hydraulic cylinder can cause uneven, jerky cylinder movement
when the hydraulic controls are being operated and unwanted cylinder movement when those controls
are not being operated.
WARNING
Do not lock the auxiliary hydraulics of your tractor or power unit in the “ON”
position. Failure to obey this warning could result in death or serious injury.
Summary of Contents for LAF5412
Page 2: ......
