Page 6
Connection layout bottom
8 pin ESC connector:
•
BAT+: Battery voltage out to supply FC power
•
GND
•
ESCTLM/Onewire: ESC Telemetry signal to FC or Onewire signal pin (depending on
configuration)
•
Signal 1-4: ESC signal output for each ESC
Receiver connector:
•
UPRT: Receiver signal to FC (see page 10 receiver connection diagram for further
information)
•
RXTLM: Telemetry signal to receiver (see page 10 receiver connection diagram for
further information)
•
5V
•
GND
6 pin connector (SER3):
•
RX3: function configurable in GUI
•
TX3: function configurable in GUI
•
3,3V
•
VCC: Battery voltage
•
5V
•
GND
