Introduction
Thank you for purchasing the FETtec AIO 35A.
Features
FC:
•
Latest STM32G4 Processor
◦
Math accelerator
◦
MPU6000
•
Supply voltage 12-25V (3S-6S Lipo voltage)
•
2x dedicated onboard 5V BEC for VTX (max. 600mA each)
◦
5V BEC for RX
◦
5V/16V BEC for VTX (switchable and real Pit*)
•
1x 8 pin connector for solder free VTX, cam connection and OSD or digital systems
◦
VCC, GND, Video in, Video out, BEC 5V/16V, VCS/TX3, RX3
•
2x 4 pin connector for receiver and VTX
◦
Signal, telemetry, 5V, gnd
◦
Gnd, 5V, TX1, RX1
•
5 UART serials
◦
UART 1 free
◦
UART 2 used for Receiver
◦
UART 3 free
◦
UART 4 used for onboard OSD, can be set free
◦
UART 5 used for ESCs / TLM / Onewire
•
Solder pad for RGB LEDs
•
Supported ESC protocols
◦
PWM, Oneshot125, Oneshot42, Dshot150/300/600/1200/2400, FETtec Onewire
•
KISS FC firmware
*real Pit-Mode: A power supply pin which is remotely switchable
Page 3
