Festool SYSLITE STL 450, Operating Manual

Page: 15 / 77

15
STL 450
GB
7.1 Setting device up for use at floor
level
The grazing light can be set up in two dif-
ferent positions
[3 A]+[3 B] .
7.2 Setting device up for use above
floor level
Only use the device together
with the Festool tripod ST
DUO 200 and the Festool
adapter AD-ST DUO 200
(some items not included).
Please follow the instructions contained
in the operating manual for the tripod
and the adapter.
Place the tripod on a dry, level and stable
surface. Fold out the tripod legs to the
limit stop.
Connecting the tripod and adapter [4]

Open the tripod to the limit stop.

Place the adapter in the required posi-
tion on the tripod up to the limit stop.

Turn the adapter until it clicks into
place.
Connecting the adapter and grazing
light [5]
Only fit the grazing light clip to the
marked area on the grazing light
[5-1] .

Insert the back of the grazing light into
the grazing light clip.
Positioning the grazing light [6]

Use the two rotary hinges to align the
grazing light in the direction of the tar-
get surface.

Adjust the height of the tripod.
8 Service and maintenance
Customer service and repair
only by manufacturer or ser-
vice workshops: Find your
nearest address online at
www.festool.com/service
Always use original Festool
spare parts! Order no. at:
www.festool.com/service
–Always clean the plastic cov-
er on the grazing light using a soft, dry
cloth and a mild cleaning agent to pre-
vent any damage. Do not use solvents.
9 Environment
Do not dispose of
the device in house-
hold waste!
Recycle
devices, accessories
and packaging. Ob-
serve applicable na-
tional regulations.
[3 E] Inclined surfaces -> 7.2 sec-
tion.
WARNING
Risk of injury, electric shock

Always pull the mains plug from the
socket before performing any servic-
ing and maintenance work!

All maintenance and repair work
which requires the housing to be
opened should always be carried out
by an authorised service workshop.
EKAT
1
2
3
5
4