RAP 150 FE
13
GB
3
Intended use
The machine is designed for polishing painted sur-
faces. To guarantee electrical safety, the machine
must not be damp or operated in a damp environ-
ment.
The user bears the responsibility for damage and
accidents caused by improper use.
4
Technical data
5
Machine features
The specified illustrations appear at the beginning
of the Operating Instructions.
6
Operation
The switch
[1-4]
is an on/off switch (press = ON, re-
lease = OFF).
The locking button
[1-3]
can be engaged to operate
in continuous mode. Press the switch again to re-
lease the knob.
7
Settings
7.1
Electronics
The machine features full-wave phase control elec-
tronics with the following features:
Smooth start-up
The electronically controlled smooth start-up en-
sures that the machine starts up jolt-free.
Speed control
The available speed when the ON/OFF switch
[1-4]
is pressed down fully can be set
[1-2]
between 600
and 1400 rpm (RAP 150-14) or 900 and 2100 rpm
(RAP 150-21) using the adjusting wheel. This en-
ables you to optimise the cutting speed to suit the
surface (see table).
The power tool is fitted with a variable speed
trigger: Pressing the ON/OFF switch harder in-
creases the speed.
S H I N E X
rotary polisher
RAP 150-14 FE
RAP 150 -21 FE
Power
10 A
10 A
Speed
600 - 1400 rpm
900 - 2100 rpm
Max. speed
1
3000 min
-1
3000 min
-1
Polishing pads up to
dia.150 mm (5.9 in.)
dia. 150 mm (5.9 in.)
Weight (without mains cable/polishing pad)
2,1 kg
2,1 kg
Safety class
/II
/II
1.
Max. speed in the event of faulty electronics.
[1-1]
Spindle stop
[1-2]
Speed control
[1-3]
Locking button
[1-4]
On/Off switch
[1-5]
Lint filter
[1-6]
Additional handle
[1-7]
Polishing pads
WARNING
Unauthorised voltage or frequency!
Risk of accident
The mains voltage and the frequency of the pow-
er source must correspond with the specifica-
tions on the machine's name plate.
In North America, only Festool machines with
the voltage specifications 120 V/60 Hz may be
used.
WARNING
Risk of injury, electric shock
Always pull the mains plug out of the socket be-
fore performing any type of work on the ma-
chine!
Application
Adjusting wheel
setting
Working in polish
1 - 2
Polishing sensitive surfaces
3 - 4
High-gloss polishing
5 - 6
Summary of Contents for SHINEX RAP 150-14 FE
Page 2: ......
Page 3: ......
Page 4: ...1 1 1 2 1 3 1 4 2 1 2 2 1 2 1 5 1 6 1 7 2 3 1 2 3 Ø 150 mm ...
Page 5: ...1 2 4 2 3 1 3 2 4 1 3 4 ...
