13
ETS EC 150
The specified emission values (vibration, noise)
– are used to compare machines.
– They are also used for making preliminary
estimates regarding vibration and noise loads
during operation.
– They represent the primary applications of the
power tool.
Increase possible for other applications, with other
insertion tools or if not maintained adequately.
Take note of idling and downtimes of machine!
3
Intended use
The sanders are designed for sanding wood, plas-
tic, composite, paint/varnish, filler and similar
materials as directed. With mixed dust containing
metal (such as dust resulting from paint sanding
in the automotive industry) and when sanding
damp surfaces, special safety instructions must
be followed.The sanders are not intended to be
suitable for grinding bare metal. Material contain-
ing asbestos cannot be processed.
The user is liable for improper or non-in-
tended use.
4
Technical data
Eccentric sander
ETS EC
150/3 EQ
ETS EC
150/5 EQ
Power
400 W
Idle speed
6000 – 10000 rpm
Sanding stroke
3.0 mm
5.0 mm
Sanding pad
D 150 mm
Weight (without
mains cable, with
sanding pad)
1.2 kg
Safety class
/ II
5
Machine features
[1-1]
ON/OFF button
[1-2]
Speed control
[1-3]
Sanding pad
[1-4]
Plug-it connection
[1-5]
Extractor connector
[1-6]
LED for extractor signal
The specified illustrations appear at the beginning
of the Operating instructions.
6
Commissioning
WARNING
Unauthorised voltage or frequency!
Risk of accident
X
The mains voltage and the frequency of the
power source must correspond with the
specifications on the machine’s name plate.
X
Observe country-specific regulations.
Connecting and detaching the mains power cable
- see Fig.
[2]
.
Before switching on the power tool, make
sure that the bayonet fitting at the mains
cable is closed fully and locked.
ON/OFF button [1-1]
ON
Press the ON/OFF button
[1-1]
OFF Press the ON/OFF button
[1-1]
When the extractor signal is active, the
power tool cannot be switched on without
a connected extractor hose - see chapter
7.3.
7
Settings
CAUTION
Risk of injury, electric shock
X
Always pull the mains plug out of the socket
before performing any type of work on the
machine!
7.1
Electronics
The power tool is equipped with a brushless
EC-TEC motor for a long service life and power
electronics with the following properties:
Smooth start-up
The electronically controlled smooth start-up
ensures that the machine starts up jolt-free.
Constant speed
The preselected motor speed is kept constant
through electronic control to ensure a uniform
sanding speed even when under load.
Speed reduction in the event of high vibrations
If high vibrations and oscillations occur at the
power tool, e.g. with the use of an interface pad,
the speed is automatically reduced in order to
protect the power tool and the user.
