–
Do not use power supply units or third-
party battery packs to operate cordless
power tools. Do not use third-party charg
ers to charge the battery packs.
The use of
accessories not expressly authorised by the
manufacturer can result in electric shocks
and/or serious accidents.
2.3
Emission levels
The levels determined in accordance with
EN 62841 are typically:
DWC 18-2500
Sound pressure level
L
PA
= 67 dB(A)
Sound power level
L
WA
= 78 dB(A)
Uncertainty
K = 3 dB
DWC 18-4500
Sound pressure level
L
PA
= 72 dB(A)
Sound power level
L
WA
= 83 dB(A)
Uncertainty
K = 3 dB
CAUTION
Noise generated when working
Risk of damage to hearing
► Use ear protection.
Vibration emission level a
h
(vector sum for
three directions) and uncertainty K measured in
accordance with EN 62841:
DWC 18-2500
a
h
≤ 2.5 m/s
2
K = 2 m/s
2
DWC 18-4500
a
h
≤ 2.5 m/s
2
K = 2 m/s
2
The specified emission levels (vibration, noise)
– are used to compare machines.
– They are also used for making preliminary
estimates regarding vibration and noise
load during operation.
– They represent the primary applications of
the power tool.
CAUTION
The emission values may deviate from the
specified values. This is dependent on how
the tool is used and the type of workpiece
being machined.
► The actual load during the entire operating
cycle must be evaluated.
► Depending on the actual load, suitable pro
tective measures must be defined in order
to protect the operator.
3
Intended use
Drywall screwdriver suitable for the following
screwdriving tasks:
DWC 18-2500
– Screwdriving gypsum fibre board to metal
or wooden constructions using drywall
screws with milling ribs
– Screwdriving chipboard/OSB to wooden
constructions with wood screws and chip
board screws up to a diameter of 5 mm
DWC 18-4500
– Screwdriving plaster boards onto metal
profile bars (≤ 0.88 mm) using drywall
screws with a fine thread
– Screwdriving plaster boards onto metal
profile bars (≤ 2.25 mm) using drywall
screws with a drill point
– Screwdriving plaster boards to wooden
constructions using drywall screws with a
coarse thread
This power tool is suitable for use with
BP Festool battery packs of the same voltage
class.
The user is liable for damage and acci
dents caused by improper and non-inten
ded use; this also includes damage and wear
caused by continuous industrial operation.
4
Technical data
Cordless drywall screwdrivers
DWC 18-2500
DWC 18-4500
Motor voltage
18 V
18 V
No-load speed*
0–2500 rpm
0–4500 rpm
Torque soft/hard
7/18 Nm
5/14 Nm
Tool holder
1/4" DIN 3126/
ISO 1173
1/4" DIN 3126/
ISO 1173
English
14
