17
DTS 400 REQ, RTS 400 REQ
Adjusting
wheel
setting
– Sanding solid wood and veneered
edges
– Sanding rebate of windows and
doors
– Intermediate sanding of paintwork
at edges
– Light sanding of natural wood
windows using sanding cloth
– Smoothing wooden surfaces using
sanding cloth before staining
– Rubbing or removing excess
limestone residue using sanding
cloth
3 - 4
– Intermediate sanding of paintwork
on stained surfaces
– Cleaning natural wood window
rebate using sanding cloth
2 - 3
– Sanding stained edges
– Sanding of thermoplastics
1 - 2
9
Service and maintenance
WARNING
Risk of injury, electric shock
X
Always disconnect the mains plug from the
socket before performing maintenance work
on the machine!
X
All maintenance and repair work which re-
quires the motor housing to be opened must
only be carried out by an authorised service
workshop.
Customer service and repair.
Only
through manufacturer or service work-
shops: Please find the nearest address
at: www.festool.com/Service
EKAT
1
2
3
5
4
Use only original Festool spare parts!
Order No. at: www.festool.com/Service
The machine is equipped with special carbon
brushes. If they are worn out, the power is
interrupted automatically and the machine comes
to a standstill.
To ensure constant air circulation, always keep the
cooling air openings in the motor housing clean
and free of any obstruction.
In the event of a slowdown in performance or
increased vibrations, blow and clean cooling air
openings.
10
Accessories
Use only original Festool sanding pads. Low-
quality sanding pads may cause serious machine
imbalance that decreases the quality of the
working results and increases machine wear.
The order numbers of the accessories and tools
can be found in the Festool catalogue or on the
Internet under “www.festool.com”.
11
Environment
Do not dispose of electric power tools
in household waste!
Recycle devices,
accessories and packaging! Observe
the valid national regulations.
