Festool CT MIDI HEPA, Instruction Manual

Page: 6 / 32

6
Electrical connection
The operating voltage shown on the specifi cation
plate must be the same as the mains power volt-
age (wall socket).
Make sure that the dust extractor
is switched off when you plug in the power cord.
The antistatic system (AS)
The friction of material running through the suc-
tion hose causes electrostatic charges, which
can result in unpleasant electric shocks for the
operator.
In order to prevent this, this dust extractor has an
integrated antistatic system which conducts these
static charges to ground. This requires the use of
antistatic hoses and accessories.
On/off switch
In position O (1.1) the dust extractor is switched
off and the tool plug socket (1.3) is dead.
Two modes of operation are possible:
a) Switch at “MAN” (manual control):
The tool plug socket is dead.
When you turn the switch to “MAN” the extractor
motor will start immediately and will stay on as
long as the switch is at this position.
You can use this mode of operation with out a tool
connected to the tool plug socket.
b) Switch at “Auto” (automatic tool-triggered
operation):
The tool plug socket is live.
Before turning the switch to the
“Auto” position, make sure that the tool connected
to the tool plug socket is switched off.
The cleaner motor starts only when the tool con-
nected to the appliance plug socket is switched
on.
1.4
1.5
1.1
1.2
1.3
Getting started
The user is solely responsible for
any damage or accident caused by using this ma-
chine for other than its intended purpose.