Festool AT 65 E Instruction Manual Download Page 12

22

The order numbers for these and for other accessories that

allow you to use your Festool portable circular saw effectively

and in many ways, can be found in the Festool catalogue or

on the Internet under “www.festool.com”.

7 Warranty
Conditions of 1+2 Warranty

You are entitled to a free extended warranty (1 year + 2

years = 3 years) for your Festool power tool. Festool shall be

responsible for all shipping costs during the first year of the

warranty. During the second and third year of the warranty

the customer is responsible for shipping the tool to Festool.

Festool will pay for return shipping to the customer using UPS

Ground Service. All warranty service is valid 3 years from

the date of purchase on your receipt or invoice.

Festool Limited Warranty

This warranty is valid on the pre-condition that the tool is

used and operated in compliance with the Festool operating

instructions. Festool warrants, only to the original consumer

purchaser, that the specified tool will be free from defects in

materials and workmanship for a term of one year from the

date of procurement. Festool makes no other warranty,

express or implied, for Festool portable power tools. No agent,

representative, distributor, dealer or employee of Festool has

the authority to increase or otherwise change the obligations

or limitations of this warranty. The obligations of Festool in its

sole discretion under this warranty shall be limited to the repair

or replacement of any Festool portable power tool that is found

to be defective as packaged with the User Manual.

Excluded from coverage under this warranty are: normal wear

and tear; damages caused by misuse, abuse or neglect;

damage caused by anything other than defects in material

and workmanship. This warranty does not apply to accessory

items such as circular saw blades, drill bits, router bits, jigsaw

blades, sanding belts, and grinding wheels. Also excluded are

“wearing parts”, such as carbon brushes, lamellas of air tools,

rubber collars and seals, sanding discs and pads, and batteries.

Festool portable power tools requiring replacement or repair

are to be returned with the receipt of purchase to Festool

(call 800-554-8741 for address details).

IN NO EVENT SHALL FESTOOL BE LIABLE FOR ANY

CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR

BREACH OF THIS OR ANY OTHER WARRANTY,

EXPRESSED OR IMPLIED WHATSOEVER. ALL

WARRANTIES IMPLIED BY STATE LAW, INCLUDING THE

IMPLIED WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY

LIMITED TO THE DURATION OF THREE YEARS.

Some states in the U.S. and some Canadian provinces do not

allow the limitations on how long an implied warranty lasts,

so the above limitation may not apply to you. With the

exception of any warranties implied by state or province law

as hereby limited, the foregoing express limited warranty is

exclusive and in lieu of all other warranties, guarantees,

agreements and similar obligations of Festool.

This warranty gives you specific legal rights and you may

also have other rights which vary from state to state in the

U.S. and province to province in Canada.

Seen at Ideal Tools.

Summary of Contents for AT 65 E













Reviews: