Festool 576451, Instructions Manual

Page: 12 / 41

8 Battery pack
8.1 Changing the battery pack
Inserting the battery pack [2a]
2a
BP/C 18
Removing the battery pack [2b]
2
1
2b
The battery pack is ready to use straight out of
the box and can be charged at any time.
8.2 Capacity indicator
The capacity display [1-3] indicates the charge
of the battery pack for approx. 2 seconds after
the button [1-2] is pressed:
70–100%
40–70%
15–40%
< 15%
*
* Recommendation: Charge the battery pack
before any further use.
Further information about the battery pack
and charger can be found in the corre­
sponding operating manual.
9 Settings
CAUTION
Risk of injury
► Only adjust the settings when the power
tool is switched off.
9.1 Changing direction of rotation [1-6]
– Switch to the left = clockwise rotation
– Switch to the right = counterclockwise rota­
tion
9.2 Changing gear [1-8]
Only actuate the gear switch with the tool
switched off. Otherwise there is a risk of
damaging the gear unit.
• Gear switch forwards (digit 1 visible) =
1st gear
• Gear switch to rear (digit 2 visible) =
2nd gear
9.3 Fastening
Adjust the switch so that its marking [1-11]
faces the screw symbol [1-10] .
Adjust the torque accordingly at the torque
wheel [1-12] .
Position 1 = low torque
Position 25 = high torque
An acoustic signal sounds when the preset tor­
que is reached and the machine then switches
off. You must release and press the ON/OFF
switch [1-5] again to start the machine.
9.4 Drilling
Adjust the switch [1-11] so that its marking
faces the drilling symbol [1-9] . Maximum tor­
que is set in this position.
English
12