Wear suitable personal protective equip
ment:
Ear protection and safety goggles.
CAUTION! Power tool can jam and cause
sudden kickback!
Switch off immediately!
–
Hold the power tool firmly in your hand.
Make sure the speed is adjusted correctly
when screwdriving. Be prepared for a high
reaction torque,
which may cause the pow
er tool to turn and possibly lead to injury.
–
Do not use the power tool in the rain or in
damp surroundings.
Moisture in the power
tool may cause a short circuit and fire.
– Do not lock the on/off switch in place per
manently.
–
Do not use power supply units or third-
party battery packs to operate cordless
power tools. Do not use third-party charg
ers to charge the battery packs.
The use of
accessories not expressly authorised by the
manufacturer can result in electric shocks
and/or serious accidents.
–
Only for AS/NZS:
The tool shall always be
supplied via residual current device with a
rated residual current of 30 mA or less.
2.4
Emission levels
The levels determined in accordance with
EN 62841 are typically:
Drilling
Sound pressure level
L
PA
= 65 dB(A)
Sound power level
L
WA
= 76 dB(A)
Uncertainty
K = 3 dB
Fastening
Sound pressure level
L
PA
= 64 dB(A)
Sound power level
L
WA
= 75 dB(A)
Uncertainty
K = 3 dB
CAUTION
Noise generated when working
Risk of damage to hearing
► Use ear protection.
Vibration emission level a
h
(vector sum for
three directions) and uncertainty K measured in
accordance with EN 62841:
Drilling in metal
a
h
= 3.6 m/s
2
K = 1.5 m/s
2
Fastening
a
h
< 2.5 m/s
2
K = 1.5 m/s
2
The specified emission levels (vibration, noise)
– are used to compare machines.
– They are also used for making preliminary
estimates regarding vibration and noise
load during operation.
– They represent the primary applications of
the power tool.
CAUTION
The emission values may deviate from the
specified values. This is dependent on how
the tool is used and the type of workpiece
being machined.
► The actual load during the entire operating
cycle must be evaluated.
► Depending on the actual load, suitable pro
tective measures must be defined in order
to protect the operator.
3
Intended use
Cordless drill suitable
– for drilling in metal, wood, plastics and
similar materials,
– for screwing in and tightening screws.
– intended for use with BP Festool battery
packs of the same voltage class.
The user is liable for damage and acci
dents caused by improper and non-inten
ded use; this also includes damage and wear
caused by continuous industrial operation.
4
Technical data
Cordless drill
C 18 Li
Motor voltage
18 V
No-load speed*
1st gear 0 - 450 rpm
1st gear 0 - 1500 rpm
English
13