Festo YHBP, Operating Instructions Manual

Page: 14 / 18

9 Commissioning
CAUTION!
Risk of injury due to unexpected movement of components.
• Protect the positioning range from unwanted intervention.
• Keep foreign objects out of the positioning range.
• Perform commissioning at low speed.
NOTICE!
Material damage due to incorrect or incomplete installation.
The following conditions must be fulfilled for commissioning:
•
The system must be fully assembled.
• The electrical installation must be complete and checked.
• The pneumatic installation must be complete and checked.
Prior to commissioning, a safety analysis must be carried out and all appropriate measures implemen-
ted. Commissioning is dependent on the customer-specific application.
–
During commissioning, observe the associated documentation for the installed individual com-
ponents
è
1.1 Applicable documents.
Web visualisation of the balancer controller CECC-D-BA enables commissioning via the web browser
è 1.1 Applicable documents.
Power supply
When switching on the power supply, proceed as follows:
1. Switch on the power supply.
2. Switch on the compressed air supply.
10 Operation
Operation is dependent on the customer-specific application.
Supplementary notes on operation
è Additional documents.
During operation, observe the associated documentation for the individual components installed
è 1.1 Applicable documents.
Commissioning
14 Festo — YHBP — 2020-09