Festo VMPA...-FB-EPL Series, Electronic Manual

Page: 194 / 232

A. Technical appendix
A−4
Festo P.BE−CPX−EA−E N en 0705f
Technical specifications VABA−10S6−X1 for VTSA pneumatics (ISO)
General technical specifications of the
CPX terminal See CPX system manual
Protection class as per EN 60 529 IP65, in fitted state
Operating voltage supply for elec
tronics/sensors (V
EL/SEN
)
Rated voltage
Internal current consumption at 24 V
(internal electronics)
24 V DC ± 25 %
type. 15 mA
Load voltage supply for valves (V
VAL
)
Rated voltage
Internal current consumption at 24 V
(internal electronics, without valves)
Diagnostic message undervoltage
V
VAL
(monitoring V
VAL
, load voltage
outside function range)
24 V DC ± 10 %
type. 30 mA
Ţ
21.6 ... 21.5 V
Digital outputs (valve solenoid coils)
Rated load voltage
Intended for connecting to pneu
matics
Short circuit protection at valve out
put
Monitoring wire fracture (open load)
max. 32 outputs
V
VAL
VTSA (ISO, type 44)
Yes (electronic),
Response threshold > 1.0 A
Can be parametrized
Isolation tested with 500 V DC
Electrical isolation
between the channels
(valve solenoid coils)
between the operating voltage sup
ply for the electronics/sensors
(V
EL/SEN
) and the load voltage for the
valves (V
VAL
)
none
With power supply via manifold sub−base type:
CPX−GE−EV−S: none
CPX−GE−EV−S−7/8−
5 POL: Yes
CPX−GE−EV−V...: Yes
Module code [type code] (CPX−specific)
Module identification (Handheld) 69
ISO Plug−In or type 44 (depending on the version of the
Handheld)