Festo VABA-10S6-X Series, Manual

Page: 92 / 196

3. Digital CPX output modules
3−4
Festo P.BE−CPX−EA−EN en 0804g
3.3 I ns t a ll a t i o n
W a r nin g
Sudden unexpected movement of the connected actuators
and uncontrolled movements of loose tubing can cause
injury to human beings or damage to property.
Before carrying out installation and maintenance work,
switch off the following:
the compressed air supply
the operating and load voltage supplies.
In the following sections you will find the pin assignments of
the output modules for the different sub−bases.
Instructions on connecting the cables and plugs to the sub−
bases can be found in section 1.2.3.
Power supply
The 24 V supply for the outputs is provided via the load
voltage outputs of the CPX terminal (V
OUT
).
The power supply for the electronics of the output modules is
provided via the operating voltage supply for the electronics/
sensors (V
EL/SEN
).