Festo VABA-10S6-X Series, Manual

Page: 173 / 196

A. Technical appendix
A−13
Festo P.BE−CPX−EA−E N en 0804g
T e c h ni c a l s p e c i f i c a t i o n s VABA−10S6− X 1/− X 2 for
VTSAp n eu m a t i c s (ISO)
General technical specifications of the CPX terminal see CPX system manual
Protection class as per EN 60529 IP65, in fitted state
Operating voltage supply for electronics/sensors (V
EL/SEN
)
Nominal voltage
Internal current consumption at 24 V (internal electronics) 24 V DC ±25 %
typ. 15 mA
Load voltage supply for valves (V
VAL
)
Nominal voltage
Internal current consumption at 24 V (internal electronics,
without valves)
Diagnostic message undervoltage V
VAL
(monitoring V
VAL
,
load voltage outside function range)
24 V DC ±10 %
typ. 30 mA
Ţ
21.6
Ū
21.5 V
Digital outputs (valve solenoid coils)
Rated load voltage
Intended for connecting to pneumatics
Short circuit protection at valve output
Monitoring wire fracture (open load)
max. 32 outputs
V
VAL
VTSA (ISO, type 44)
yes (electronic),
response threshold
,
1.0 A
can be parameterized
Isolation tested with 500 V DC
Electrical isolation...
between the channels (valve solenoid coils)
between the operating voltage supply for the electronics/
sensors (V
EL/SEN
) and the load voltage for the valves (V
VAL
)
none
with power supply via manifold
sub−base type:
CPX−GE−EV−S:
none
CPX−GE−EV−S−7/8− 5 POL: yes
CPX−GE−EV−V...: yes
Module code [type code] (CPX−specific)
Module identification (Handheld) 69
ISO PlugIn or type 44 (depending
on the version of the Handheld)