Festo VABA-10S6-X Series, Manual, Page: 117 / 196

3. Digital CPX output modules
3−29
Festo P.BE−CPX−EA−EN en 0804g
3.5.3 Fault treatment and parameterizing
The following diagram shows the error treatment in the
output modules. Further registering and display of the faults
can be suppressed as desired with the appropriate module
parameters, represented in the diagram as switches. The
parameters are described in section 3.4.
2
Error message to
the bus node
...
Fault no. 5
Fault in load
voltage for
outputs
Fault no. 2
Short circuit/
overload at
output 0
Fault no. 2
Short circuit/
overload at
output 3
Surveillance
V
OUT
Surveillance
SCO
Module
fault LED
3
1
Channel−related
error LED
channel 3 Channel−related
error LED
channel 0
...
0 1
0 1
1
Module parameters (switch position represented = default setting)
2
Module−specific faults
3
Channel−specific faults
Fig.3/2: Principle of error treatment and parameterizing in the output modules