Festo VABA-10S6-X Series, Manual

Page: 112 / 196

3. Digital CPX output modules
3−24
Festo P.BE−CPX−EA−EN en 0804g
M od u l e p a r a mete r s : Idl e m od e c h ann e l x
Function no. Access to these module parameters is made via protocol−specific functions
(see the manual for the bus node).
Description Only relevant for certain field bus protocols
Idle mode channel x:
Hold last state
Idle state (presetting)
Idle state channel x: Set output
Reset output (presetting)
Note With the aid of the so−called Idle mode parameterization, you can determine the
signal status which the outputs are to assume when switching is made to the
Idle state (see also CPX system manual).
This parameter is not available with all field bus protocols.
Tab.3/21: Idle mode channel x (channel−specific)
M od u l e p a r a mete r s : For ce c h ann e l x
Function no. Access to these module parameters is made via protocol−specific functions
(see the manual for the bus node).
Description Force mode of outputs channel x: blocked (presetting)
Force state
Force state of outputs channel x: Set signal
Reset signal (presetting)
Note The Force function enables the manipulation of signal states detached from
actual operating states (see also CPX system manual).
Tab.3/22: Force channel x (channel−specific)