1
User instructions
Control panel type SPC200-MMI-... is designed for commission-
ing, programming, diagnosing and operating the Smart
Positioning Controller SPC200. It can be fitted directly onto the
SPC200 when the power supply is switched off.
Detailed information on the control panel as well as on com-
missioning and programming the SPC200 with the control panel
can be found in the User Manual P.BE-SPC200-.... .
CAUTION:
Pay strict attention to the following instructions shown
therein:
– safety guidelines
– specifications for the use of each module and component.
WARNING
If the control panel is plugged into or disconnected from the
SPC200 while the power supply is switched on, actuators
may be activated unintentionally and both the SPC200 and
the control panel may be damaged.
Before undertaking installation and/or maintenance work,
switch off the following sources of power in the sequence
specified:
1. the compressed air supply
2. the load voltage and operating voltage supplies for
the SPC200.
SPC200-MMI-1
9804NH
9
