Festo Smart cubic CPVSC1-VI, Manual

Page: 27 / 92

2. Fitting
2−5
Festo P.BE−CPVSC−E N en 0301a
2.2.1 Fitting onto a wall
Caution
CPV−SC valve terminals can become distorted and there
fore damaged if they are mounted on an uneven pliable
surface.
·
Fit the CPV−SC valve terminal only onto a flat fixed sur
face.
The end plates have holes for fitting the terminal onto a wall
(see table 2/1).
Fitting Proceed as follows:
1. Make sure that the fastening surface can support the
weight of the CPV−SC valve terminal (weights see Appen
dix A).
Make sure there is sufficient space for connecting the power
cables and compressed air tubing.
2. Bore four fastening holes with 3.2 mm diameter or
threaded holes for M3 screws in the fastening surface
(distance between holes see table):