Festo Smart cubic CPVSC1-VI, Manual

Page: 11 / 92

Contents and general instructions
IX
Festo P.BE−CPVSC−E N en 0301a
List of abbreviations
The following product−specific terms and abbreviations are
used in this manual:
Term/abbreviation Meaning
Additional pressure supply
plate Plate for additional pressurization and exhausting of the valve
terminal
Blanking plate Plate without valve function in order to fill an unused location
Components Common term for electric sub−bases, end plates, blanking plates,
separator plates and valve plates
Connecting the tubing Connecting the supply lines (tubing) to the CPV−SC valve terminal
CP C ompact P erformance
CPVSC1 Size designations of the CPV−SC valve terminals and micro valve
plates
CPV−SC valve terminal C ompact P erformance V alve terminal S mart C ubic (type 80)
Electrical sub−base Sub−base with electric multipin connection
End plate Termination plate at the left and right−hand ends of the CPV−SC valve
terminal with channels or connections for supplying the valves with
compressed air and for conducting the exhaust air.
Manual override Manual override
MP connection
(multipin connection) Variant of valve terminal with 15−pin sub−D plug or flat ribbon cable
connection. All valve solenoid coils are connected centrally via this
connection.
Separator plate Plate for dividing the valve terminal into pressure zones
Valve plate Plate with single−solenoid valve or double−solenoid valve
Valve manifold Basic unit with valve plates, blanking plates and end plates
Tab.0/1: Product−specific terms and abbreviations