Festo Smart cubic CPA-SC Series, Manual

Page: 116 / 136

A. Technical appendix
A−4
Festo P.BE−CPASC−EN en 0412b
Sever.
class Vibration Shock Permanent shock
1 0.15 mm path at 10...58 Hz
2 g acceleration at 58...150 Hz ± 15 g at 11 ms duration
5 shocks in each direction ± 15 g at 6ms duration
1000 shocks in each direct.
2 0.35 mm path at 10...60 Hz
5 g acceleration at 60...150 Hz ± 30 g at 11 ms duration
5 shocks in each direction −−−−−
Tab.A/2: Values for vibration and shock as per DIN/IEC 68
General Approximate weights
Weights
CPA−SC valve terminal:
Base block basic weight of CPA−SC valve terminal:
with MP/FL connection
with HC/PI connection
with DI connection
Base block additional weight per valve location:
per valve plate
per blanking plate
Individual location valve:
Base block with valve plate
250 g
100 g
500 g
40 g
50 g
6 g
200 g
Tab.A/3: Weights
Caution
Operate the CPA−SC valve terminal only with the medium
described below:
If possible, use non−lubricated pilot air (connections
12/14). Otherwise note the instructions in the section
Preparing the compressed air" in chapter 3.
In the case of CPA valve terminals with internally
branched pilot air, the above−mentioned instruction also
applies to the supply air (connection 1).