Festo SFC-DC series, Manual

Page: 42 / 202

2. Fitting
2−4
Festo P.BE−SFC−DC−IO−EN en 0801a
2.3 Fitting the controller
You can fit the SFC−DC in one of two ways:
wall fitting on an even surface
fitting on a top−hat rail.
Please note
Fit the SFC−DC or the top−hat rail so that there is sufficient
space above or below for heat dissipation 40 mm).
Fitting onto a wall
You will require:
a mounting surface of approximately 120 x 160 mm.
2 sets central supports type MUP−18/25 (accessories).
The four brackets are clipped onto the edge of the
housing (see Fig.2/2).
4 threaded holes for screw size M3 (for dimensions see
Fig.2/2) with suitable screws.
RS−232 Ref I/F
Power
Error I/F
120 mm
approx. 105
Fig.2/2: Screwing the SFC−DC to the wall