SDE3−...
Festo SDE3−... 0604a English
35
3
Function and application
The SDE3−... has been designed for monitoring changes in pressure in the com
pressed air system or terminal devices. Variants for relative pressure measurement
and differential pressure measurement are available:
Type
Description
Input values
1)
Switching
outputs
SDE3−...−..Z
1x differential
pressure p1 p2
2)
In A
Out A, Out B
SDE3−...−..S
1x relative pressure
In A
Out A, Out B
SDE3−...−..D
2 x relative pressure
In A
Out A
In B
Out B
1)
In A: Input value for sensor element A; In B: Input value for sensor element B
2)
Measuring pressure p1 Reference pressure p2
Fig.3
The SDE3−...−..D offers in one device two inde
pendently operating sensor elements (A/B)
to each of which a switching output (Out A/
Out B) is assigned.
The measurement of the input values (InA/
InB) at the pneumatic connections takes
place with the aid of piezoresistive sensor
elements with downstream−switched elec
tronic evaluating unit. The measured result is now shown numerically and graphically
on the display. Connection to higher−order systems is made via 2 switching outputs
(Out A/B) which can be configured as normally−open and normally closed contacts.
The desired switching points of both outputs can be defined as threshold value
comparator or window comparator.
Fig.4
*)
Only type SDE3−...−..D
Summary of Contents for SDE3 series
