Festo SDE1 Series, Operating Instructions Manual

Page: 36 / 64

SDE1−...
Festo SDE1−... 0511e English
36
Features Type designation
Pressure sensor SDE1−...
Pressure range −V1−...
(0...−1 bar) −B2−...
(−1...+1 bar) −D2−...
(0...2 bar) −D6−...
(0...6 bar) −D10−...
(0...10 bar)
Accuracy −G2−... (for accuracy, see Technical specifications)
Pneumatic con
nection, mounting,
measured variable −R18−
1)
(male thread R
x
, relative pressure)
−R14−
1)
(male thread R
¼
, relative pressure)
−H18− (female thread G
x
, hat−rail mounting, relative pressure)
−W18− (female thread G
x
, with adapter plate for surface mounting, relative
pressure)
−FQ4− (plug connection QS−4, front panel mounting, differential and relative
pressure)
−HQ4− (plug connection QS−4, differential pressure, differential and relative
pressure)
−WQ4− (plug connection QS−4, with adapter plate for surface mounting,
differential and relative pressure)
−MS4− (for adapting to MS4−series service units, relative pressure)
−MS6− (for adapting to MS6−series service units, relative pressure)
Display −C− (back−lit LCD display, optimised for use)
−L− (illuminated LCD display, optimised for reading)
Electrical outputs −P1− (1 PNP switching output)
−P2− (2 PNP switching outputs)
−PU− (1 PNP switching output and 0...10 V analog)
−PI− (1 PNP switching output and 4...20 mA analog)
−2I−
2)
(2 PNP switching outputs and 4...20 mA analog)
−N1− (1 NPN switching output)
−N2− (2 NPN switching outputs)
−NU− (1 NPN switching output and 0...10 V analog)
−NI− (1 NPN switching output and 4...20 mA analog)
Electrical
connection −M8− (plug M8x1)
−M12− (plug M12x1)
Connecting cable −G (SIM cable with straight connection socket, 2.5m)
−W (SIM cable with angled connection socket, 2.5m)
−G5 (SIM cable with straight connection socket, 5 m)
−W5 (SIM cable with angled connection socket, 5 m)
1)
e.g. for mounting on an MS− or D−series service unit
2)
Cannot be ordered via the modular product system (special variant)
Fig.2