Festo SDBT-MSX, Instructions & Operating

Page: 1 / 3

Translation of the original instructions
© 2019 all rights reserved to
Festo SE
& Co. KG
1 Further applicable documents
All available documents for the product
è
www.festo.com/pk.
2 Safety
2.1 Intended use
This product is intended for sensing the position of magnets (e. g. the piston posi­
tion) in Festo products. The device is intended for use in an industrial environ­
ment.
2.1.1 Area of application and approval
In combination with the UL inspection mark on the product, the information in this
section must also be observed in order to comply with the certification conditions
of Underwriters Laboratories Inc. (UL) for USA and Canada.
UL approval information
Product category code NRKH, NRKH7
File number E232949
Considered standards UL 60947­1, UL 60947­5­2
C22.2 No. 60947­1, C22.2 No. 60947­5­2
UL mark
Tab. 1
Only use power sources which guarantee reliable electrical isolation of the oper­
ating voltage in accordance with IEC/EN 60204­1. Observe also the general
requirements for PELV power circuits in accordance with IEC/EN 60204­1. Only for
connection to a NEC/CEC Class 2 supply. The device shall be supplied from an
isolating transformer having a secondary listed fuse rated 1 A.
3 Product overview
3.1 Structure
1 Connecting cable
2 Open cable end (SDBT­MSX­...­LE)
3 Plug connector M8
(SDBT­MSX­...­M8)
4 Marking of sensing range
5 Green LED: display of sensing
range; only in teach­in mode
6 Yellow LED: switching status dis­
play
7 Retaining screw
8 Capacitive operating key
Fig. 1
3.2 Function
The proximity sensor SDBT­MSX detects the magnetic field of the piston magnet.
In the sensing range of the proximity switch, a switching point can be pro­
grammed. To set a switching point in the sensing range of the proximity sensor,
there are two options:
–
Auto teach­in
– Capacitive operating key
1 Sensing range
2 Switching window
3 Hysteresis
4 Teach­in point
Fig. 2
4 Installation
4.1 Electrical
WARNING!
Risk of injury due to electric shock.
• For the electrical power supply, use only PELV circuits in accordance with IEC
60204­1/EN 60204­1 (Protective Extra­Low Voltage, PELV).
• Observe the general requirements of IEC 60204­1/EN60204­1 for PELV cir­
cuits.
• Only use voltage sources that ensure a reliable electric separation from the
mains network in accordance with IEC 60204­1/EN 60204­1.
Circuit diagrams
SDBT­…­PU­…­LE SDBT­…­PU­…­M8
SDBT­…­NU­…­LE SDBT­…­NU­…­M8
Tab. 2
4.2 Mechanical
• Mount the proximity sensor in the end position of the piston so that the end
position is in the sensing range of the sensor. If available, the orientation aid
provides the marking of the piston end position on the drive.
1 Marking of the piston end position
on the drive (if available)
2 Retaining screw
3 Marking of sensing range
4 T­slot
Fig. 3
8125856
SDBT-MSX
Proximity Sensor
8125856
2019­11a
[8125858]
Instructions | Operating
Festo SE
& Co. KG
Ruiter Straße 82
73734 Esslingen
Germany
+49 711 347­0
www.festo.com