Festo PROFIBUD-DP, Elektronics Manual

Page: 34 / 154

1. Installation CPV−DI02 and CPV−CS02
1−20
Festo P.BE−CPV−DI02−EN en 0704NH
1.3.4 Connection possibilities
Note
Use a protective cap or blanking plug to seal unused con
nections. You will then comply with protection class IP65.
Connection with field bus plugs from Festo
·
Observe the fitting instructions for the field bus plug.
You can connect the CPV Direct to the field bus easily with the
field bus plug from Festo (type FBS−SUB−9−GS−DP−B, partno.
532216). You can disconnect the plug from the CPV Direct
without interrupting the bus cable (T−TAP function).
1
Hinged cover with
display window
2
Blanking plug if
connection is not
used
3
Clamp strap for
screening/shield
connection
4
Field bus
incoming (IN)
5
Switch for bus
termination and
continuing field
bus
6
Field bus
continuing (OUT)
7
Only connected
capacitively
ON
A B A B
2 1 3
4 5 6 7
Bus in
Bus out
Fig.1/6: Field bus plug from Festo, type FBS−SUB−9−GS−DP−B