Festo PROFIBUD-DP, Elektronics Manual

Page: 133 / 154

A. Technical appendix
A−3
Festo P.BE−CPV−DI02−EN en 0704NH
A.1 T e c h ni ca l s p e c i f i ca ti o n s
A.1.1 Common technical specifications of CPV−DI02 and CPV−CS02
Gene r a l in for ma ti o n
T e m p e r a tu r e r a n g e
operation
storage/transport −5
Ū
+50 °C
−20
Ū
+70 °C
R e l a ti v e a i r h u m i d it y 95 %, non−condensing
Pro te c ti o n c l ass as per EN 60529 plug connector
inserted or provided with protective cap
IP65
Pro te c ti o n a g a in s t e l e c t r i c s ho ck
(protection against direct and indirect contact
as per IEC/DIN EN 60204−1)
by means of a PELV circuit
(Protected Extra−Low Voltage)
E l e c t ro ma g neti c c o m p a ti b i l it y
EMC interference emission
EMC resistance to interference see declaration of conformity
è www.festo.com
V i br a ti o n a n d s ho ck
vibration
shock
tested as per DIN/IEC 68/EN 60068 part 2−6;
for wall mounting:
0.35 mm path at 10
Ū
60Hz,
5g acceleration at 60
Ū
150Hz
tested as per DIN/IEC 68/EN 60068 part 2−27;
for wall mounting:
±30 g at 11 ms duration;
15 cycles
V a lv e s see Pneumatics manual type P.BE−CPV−...
*)
The CP system is intended for industrial usage.