Festo MS6-WPG, Instructions & Assembly

Page: 1 / 2

Translation of the original instructions
1 Applicable documents
All available documents for the product è www.festo.com/pk.
Document Product Contents
Instructions MSE6-C2M Operating, Control and Condition Monit-
oring Module
Instructions MSE6-D2M Operating, Energy Efficiency Module
Description MSE6-E2M Assembly, Installation, Commissioning,
Energy Efficiency Module
Tab. 1
2 Safety
2.1 Safety instructions
– Only assemble the product on components that are in a condition to be safely
operated.
2.2 Intended use
Wall mounting of maintenance device modules and service unit
3 Product range overview
3.1 Scope of delivery
Wall mounting kit MS6-WPG:
1 Wall mounting (1x)
2 Module connector (1x)
3 O-ring (1x)
Fig. 1
3.2 Not in scope of delivery
Module connector MS6-MV-EX:
4 Module connector (1x)
(rear)
5 Module connector (1x)
(front)
6 O-ring (1x)
Fig. 2
4 Mounting
4.1 Mounting positions
• Depending on the configuration, mount the wall mounting kit between the fol-
lowing service units and the service device modules.
Product Type Mounting position
Wall mounting kit MS6-WPG black box
Service unit MSE6-D2M [A]
MSE6-E2M [B]
MSE6-C2M...(-M) [C]
Service device module MS6-... [D]
MS6-SV-D [E]
Tab. 2
4.1.1 Positions with service unit [A]/[B] and modules [D]
Fig. 3
4.1.2 Positions with service unit [A]/[B] and modules [D]/[E]
Fig. 4
4.1.3 Positions with service unit [C] and modules [D]
Fig. 5
4.1.4 Positions with service unit [C] and modules [D]/[E]
Fig. 6
4.2 Assembly
NOTICE!
Incorrect electromagnetic compatibility if incorrect module connectors are moun-
ted.
•
Use only module connector MS6-MV-EX.
Mounting with example of MSE6-E2M [B]:
Fig. 7
1. Remove earth cable [F] from earth terminal [G].
2. Remove module connector
2 from the wall mounting 1 .
3. Remove sub-base [H] from the service unit [B].
8105041
MS6-WPG
Wall mounting-Set
8105041
2019-01b
[8105043]
Instructions | Assembly
Festo AG & Co. KG
Ruiter Straße 82
73734 Esslingen
Germany
+49 711 347-0
www.festo.com