Festo MPA-FB Series, Manual

Page: 45 / 168

2. Fitting
2−15
Festo P.BE−MPA−EN en 0502b
2.4 Fitting/removing the manual override cap (optional)
The locking/non−locking function of the manual override can
be modified to only non−locking actuation if a cap is fitted in
the manual override.
Fitting Proceed as follows:
1. Make sure that the relevant manual overrides are in a
non−actuated state. If necessary, set locking manual over
rides to the basic position (see chapter 4, Table4/5).
2. Clip the manual override caps into the grooves in the
manual overrides (see diagram):
1
Manual override
cap
2
Manual override
1
2
Fig.2/6: Fitting the manual override caps