Festo HSP AE Series, Manual

Page: 47 / 174

2. Fitting
2−11
Festo P.BE−HSP−AE−IO−EN en 0510NH
3. Tighten the motor clamp with the specified torque.
Tightening torque HSP−12 HSP−16 HSP−25
Motor clamp 2 Nm 2 Nm 5 Nm
·
In order to carry out the functional check, swivel the
moveable mass by hand into the end positions.
2.4.2 Swivelling the motor unit (only type HSP−...−GE)
1
Fastening screws
1
Fig.2/5: Swivelling the motor unit (only type HSP−...−GE)
1. First of all turn the motor unit so that the display does not
touch the base plate when the motor unit is swivelled
(seechapter 2.4.1).
2. Loosen the four fastening screws of the motor flange.
3. Swivel the drive 90° into the desired direction.
4. Tighten the four fastening screws with the specified
torque (alignment on centring collar).