Festo HGPPI Series, Instructions Manual

Page: 52 / 192

4. Commissioning
4−8
Festo P.BE−HGPPI−PB−E N en 0605NH
4.3 I n s t a llin g the GSD file a nd s ymbol file s
GSD file If a new hitherto unknown device is to be incorporated in a
configuration program when a PROFIBUS−DP system is to
be configured, an appropriate GSD file must be installed for
this device. The GSD file contains all the necessary informa
tion for the configuration program. You will require the
appropriate symbol files for representing the device in the
configuration program.
The GSD files and symbol files for the HGPPI−... can be found
on the enclosed CD.
The most current files can be found on the Internet under the
following address:
www.festo.com/fieldbus
Start downloading the PROFIBUS (GSD) file there.
You will require one of the following GSD files for the
HGPPI−...:
fest0820.gsg (German version)
fest0820.gsd (default: English version).
Symbol files In order to represent the HGPPI in your configuration
software, you need the following symbol files:
Norm a l oper a tin g
s t a t us
Di ag no s ti c cas e Spe c i a l oper a tin g
s t a t us
File: hgppi_n.dib File: hgppi_d.dib File: hgppi_s.dib