34
Festo — EXCT — 2022-03a
Cables and hoses
9
Cables and hoses
9.1
Installing additional cable or hoses
NOTICE
Damage to hoses by continuous contact with cables.
• Install hoses separated from cables, e.g. in separate compartments of the energy chain.
• Note also the following when installing cables and hoses:
• untwisted without mechanical tension
• freely movable within the bending radius of the energy chain
• secured at the end pieces of the energy chain with cable binders
Requirement: at least one end of the cable or hose that is being installed does not have a plug.
•
Demount the motors.
Cover of the Z-axis
Fig. 18: Example EXCT-15-…-200
1. Push the Z-axis upwards and secure it at the interface to prevent its falling.
