Festo — EXCH — 2022-03b
Transport
9
5
Transport
CAUTION
Risk of injury from falling parts.
Parts of the product or the transportation protection may fall during transport or unpacking.
• Observe the identification on the transportation protection.
• Unpack the product with at least 2 persons.
NOTICE
Damage to the product due to incorrect transport.
• Observe the transport labelling and information on the packaging.
1. Transport the product to the mounting or storage location in its packaging and place on an flat,
solid surface.
2. Observe the storage conditions for storage
14.2 Operating and storage conditions.
5.1
Unpacking
NOTICE
Damage to the product due to incorrect unpacking.
• Note the identifications and information for unpacking on the transportation protection.
• Unpack the product with at least 2 persons.
• Use appropriate tools.
• Parts of the transportation protection are large and heavy:
• Do not drop parts on the product.
• Use suitable equipment for lifting and lowering (e.g. crane).
Open transport crate
•
Remove the cover and the side covers in accordance with the sequence shown on the shipping
crate.
Removing transport mounting
The product is fastened with transport screws in the transport crate.
Movable parts of the planar surface gantry are fixed with cable binders.
The transportation attachments are identified with stickers.
WARNING
Movable parts of the planar surface gantry can move uncontrollably during handling and mounting.
Danger of crushing and material damage.
• Do not remove the cable binders fixing movable parts and the transportation locks on the X-axes
until the product has been mounted on the mounting surface.
•
For mounting, remove only the labelled transport screws with which the planar surface gantry is
fastened to the transport crate.
