Festo EMCS-ST, Operating Instructions Manual

Page: 78 / 86

15 Disassembly
1. Switch off the power supplies and lock them to prevent them from being switched on again.
2. Let the device cool down to room temperature.
3. Disconnect all electrical cables.
4. Disassemble the drive system.
16 Disposal
ENVIRONMENT!
Send the packaging and product for environmentally sound recycling in accordance with the current
regulations
è www.festo.com/sp.
17 Technical data
17.1 Technical data, general
Type EMCS-ST-42-... EMCS-ST-57-...
Type of mounting Direct mounting to actuator, screw-mounted
Mounting position any
Dimensions (HxWxD) [mm] 81.3 x 42.3 x 89.0 95.6 x 56.6 x 94.1
Product weight [kg] Approx. 0.51 Approx. 0.85
Duty cycle [%] 100 (up to 30 °C)
Transport temperature [°C] −25
…
+70
Relative humidity [%] 0
…
90 (non-condensing)
Max. transportation duration [d] 30
Ambient temperature [°C] 0
…
+50
Ambient temperature with
reduction of duty cycle
"
–
2%/ °C"
[°C] 30
…
50
Permissible setup altitude
above sea level [m] 0
…
4000
Setup altitude above sea level
with reduction of duty cycle
"
–
1.2%/100 m"
[m] 1000
…
4000
Degree of protection with and
without mating connector
[Logic] [Power] IP40
Disassembly
78 Festo — EMCS-ST — 2020-04a