EGSP/EGSK
Festo EGSP/EGSK 0901NH English
25
5
I
n
s
t
a
ll
a
tion
Me
c
h
a
ni
ca
l in
s
t
a
ll
a
tion
S
Do not modify the settings of screws and
threaded pins if not directly requested to
do so in these operating instructions.
S
Mount the motor on the electrical slide in
accordance with the assembly instruc
tions for the motor mounting kit recom
mended in the catalogue.
When assembling in a vertical or sloping position:
Wa
rnin
g
Falling masses can cause personal injury
and material damage (crushing). If there is
a power failure or if the spindle nut breaks,
the work mass will drop.
S
Make sure that you use only motors with
an integrated holding brake.
S
Check whether external safety measures
are necessary to prevent damage due to
spindle nut fracture (e.g.toothed lat
ches or moveable bolts).
N
ote
S
Make sure that you mount the EGSP/EGSK using only the lower threaded
holes
4
on the basic profile.
The holes on the side are intended for fastening accessories (e.g. sensor
rail).
S
Make sure that the device is installed free of mechanical stress and sag (even
ness of bearing surface
Ţ
0.05% of stroke length).
S
Position the EGSP/EGSK so that its control elements can be reached.
Fig.2
Fig.3
