32 / 56
Festo 7DSBCa_en
4.4
Additional repair steps for DSBC-…-C (with clamping unit)
This chapter supplements the
with additional repair steps and notes for the version
DSBC-…-C (with clamping unit).
4.4.1
Structure of the clamping unit
3
2
6
4
1
5
1
Holder
2
O-ring
3
Clamping cartridge
4
Scraper ring
5
Bearing
6
Connection for compressed air or mounting screw
4.4.2
Dismantling the clamping unit
Caution
Risk of injury due to unexpected movement of components.
• Before dismantling, make sure that the ISO cylinder and the clamping cartridge are vented.
Note
The holder of the clamping unit can only be pulled off the piston rod
3
if the
clamp is released. Damage risk of the clamping cartridge.
When undoing the clamp using the mounting screw
1
, screw it in only until
the piston rod can be moved.
1. At the clamping cartridge
2
, vent the supply port with 3 up to max. 10 bar
or turn the mounting screw
1
(DSBC-32: M5; DSBC-40 … 125: G1/8) into
the supply port.
1
2
3
2. Remove the flange screws from the holder of the clamping unit.
