DRQD-6/ ... /12-...
Festo DRQD-6/ ... /12-... 0109a English
42
Dynamic accurate adjustment of the end posi-
tions:
Warning
The bolt can be ejected.
S
Make sure that the unscrewing length is
not exceeded (see chapter “Fitting,
mechanical”).
S
You should proceed as follows with the
compressed air applied.
Leakage will occur when the locking nuts
are loosened.
When all the stops have been adjusted:
S
make sure that all the adjusting parts are
secured with locking nuts (torque see
chapter “Fitting, mechanical”).
S
Repeat the test run.
When all the settings have been completed:
S
You should make final adjustments to the
proximity switches.
Fig. 43
S
Fig. 44
