DHTG-...-P4/-P4E4/-P4L12
Festo AG & Co. KG
Postfach
73726 Esslingen
Germany
+49 711 347-0
www.festo.com
Operating instructions
8059319
1605
[8059321]
Original: de
Energy throughfeed DHTG-...-P4/-P4E4/-P4L12
English
. . . . . . . . . . . . . . . . . . . . .
Note
Observe warnings and notes (
è
Applicable documents).
1
Control sections and connections
DHTG-...-P4 (pneumatic)
1
2
4 5
7
8
DHTG-...-P4E4/P4L12 (pneumatic and electric)
1
2
3
4
6
5
7
8
1
Mounting hole of the DHTG
2
Supply port P1 ... P4 (output)
3
Electrical output
S1 ... S4 (socket, P4E4) or
S1 ... S12 (socket, P4L12)
4
Mounting interface for working
load
5
Supply port P1 ... P4 (input)
6
Electrical input
S1 ... S4 (plug, P4E4) or
S1 ... S12 (socket, P4L12)
7
Housing, energy throughfeed
8
Housing, rotary indexing table
Fig. 1
2
Applicable documents
Observe the operating instructions for the DHTG rotary indexing table
(
è
www.festo.com/sp).
Dimensions of the energy throughfeed for mounting and rotating plate (catalogue
specifications
è
www.festo.com/catalogue).
3
Function and application
The energy throughfeed DHTG-...-P4/-P4E4/-P4L12 serves to permit the passage
of compressed air and electrical signals through the drive shaft of the DHTG rotary
indexing table.
DHTG-...
P4
P4E4
P4L12
Number of pneumatic channels
4
4
4
Number of electric signals
–
4
1)
12
2)
1)
Permanently assigned
2)
Freely configurable
Fig. 2
4
Transport
For lifting or setting down the size 140 and 220:
Warning
The rotary indexing table tilts by lifting or setting down on the housing
7
of
thenergy throughfeed.
Risk of injury through shearing, pinching and impact.
Take weight into account:
– Size 140
10 kg
– Size 220
25 kg
Rotary indexing table only on the bottom of the housing
8
:
– lifting (e.g. with conveyor belts)
– setting down (e.g. in transport packaging)
5
Installation
5.1 Mechanical installation
Observe warning on transport (
è
4 Transport). If the mounting position devi
ates from what is described in Fig. 3, suitable transport measures must be taken
(e.g. screw transport lugs into the thread
1
from below).
Fasten DHTG (
è
DHTG operating instructions).
Unscrew push-in fittings (A) for the sizes 65 and 90 at the upper housing. Leave
the bolts below them unchanged.
Fasten plate with at least 2 opposite screws and 2 centring sleeves to the threads
4
on the rotating plate.
4
1
(A)
8
Fig. 3
