Festo CPX-CMAX-C1-1, Mounting, Installation And Diagnostics

Page: 16 / 176

Contents and general safety instructions
XIV
Festo P.BE−CPX−CMA X−SYS−EN en 0908NH
Notes on this description
This description refers to the following versions:
CPX−CMAX−C1−1 axis controller starting from software
version V1.0
This description contains special information on the mode of
operation, mounting, installation and commissioning of the
CMAX axis controller with the modules and components on
the axis string (see Tab.0/2).
Information about the activation, programming and diagnosis
of a CMAX with the used CPX node can be found in the
CMAX communication profile" description.
Special information about the configuration for certain CPX
nodes can be found in the corresponding supplementary
description. See Tab.0/3.
General basic information on the mode of operation, mount
ing, installing and commissioning CPX terminals can be found
in the CPX system description, type P.BE−CPX−SYS−... .