Festo CPX-AP-I-PN-M12, Instructions & Operating

Page: 22 / 24

Network-specific data
Protocol PROFINET
1)
With functionalities of Class C (CC-C)
–
LLDP
– DCP
– CiR
– MRP, MRPD
– FSU
– IRT
Specification
(Standards and norms
with reference to
PROFINET) IEC 61158, IEC 61784, IEC 61918
Transmission rate [Mbps] 100
Crossover detection Auto-MDI/MDI-X
Cable length per
segment [m] 100 (max.)
Factory settings
IP address 0.0.0.0
Subnet mask 0.0.0.0
Cable specification
Cable type Ethernet twisted pair cable, shielded
Transmission class Category Cat 5 or higher
Cable diameter [mm] 6
…
8
Wire cross section [mm
2
] 0.14
…
0.75
AWG 22 (required for maximum connection length between net-
work participants)
1) Based on the Ethernet protocol IEEE 802.3
Tab. 21 Network-specific data
Technical data
22 Festo — CPX-AP-I-PN-M12 — 2019-06