Festo CPX-4AE-4AA-H, Operating Instructions Manual

Page: 11 / 52

Festo — CPX-4AE-4AA-H — 2021-06b
Assembly
11
Term/abbreviation Meaning
Process image The process image is part of a controller's system memory. At the start of
the cyclical program, the signal states of the input modules are transferred
to the process image for the inputs (PII). At the end of the cyclical program,
the process image for the outputs (PIO) is transferred to the output mod-
ules as a signal status.
PV Primary Value
QV Quaternary Value
SV Secondary Value
TV Tertiary Value
Tab. 7: Product-specific terms and abbreviations
5 Assembly
5.1 General information
CPX terminals are delivered in assembled form. Additional assembly may be required for expansion or
conversion:
–
Demounting or remounting of the connection block when exchanging the connection technology
–
Demounting and remounting of the electronics module by setting the DIL switches or exchanging
the electronics module
Arrangement on the CPX terminal
For further information on the arrangement of the modules see the description of the CPX system and
the module documents
è 1.1 Applicable documents.
5.2 Mechanically coding the manifold block
To prevent an incorrect allocation of the manifold block to the electronics module, this connection can
be mechanically coded.
–
The electronics module has a permanently attached coding pin at the top .
–
The manifold block has a recess for a coding piece at the bottom.
–
Manifold block in pre-assembled CPX terminals are mechanically coded at the factory.
1
Fig. 4: Coding pin on the electronics module
1 Coding pin