Festo CPV-VI Series, Manual, Page: 8 / 152

Contents and general instructions
VI
Festo P.BE-CPV-EN en 0005e
Notes on these instructions
This manual contains specific information on fitting, installing,
commissioning, maintaining and converting the CPV valve
terminal. It describes exclusively the pneumatic components
and refers to the variants of the CPV valve terminallisted in
the following table.
Variants of the CPV valve terminal type CPV..-VI..
with IC connection
Information on
electrics/electronics:
in this manual
with MP connection
Information on
electrics/electronics:
see leaflet supplied with
product
with CP connection
Information on
electrics/electronics:
see manual ”CP system,
installation and commis-
sioning”
with AS-i connection
Information on
electrics/electronics:
see leaflet supplied with
product
with CP direct connection
Information on
electrics/electronics:
see the manual ”CPV
valve terminal with direct
connection” for the
relevant field bus.
Information on further CP modules, as well as basic informa-
tion which must be observed in conjunction with the higher-
order system, can be found in the appropriate manuals for
the relevant module/system.
The following tables contain a summary: