Festo CP-A04-M12-CL, Manual

Page: 79 / 86

A. Technical appendix
A−19
Festo P.BE−CPEA−CL−E N en 0404NH
A.5.4 Connector sets for input module type CP−E16−KL−CL
Recommendation: Use the connector sockets type
PS1−SAC31−30POL+LED for input module type CP−E16−KL−CL.
Sockets type PS1−SAC31−30POL+LED Number Connection
cross section Recommended
for connection
Tension spring sockets,
3−row + LED 2 See leaflet with
product X1, X2
Two rows of the three−row connector socket are intended as
distributor boards for the sensor supply. These rows are each
connected internally (see Fig.A/7).
·
Fasten the sockets with the screws provided.
The maximum tightening torque is 0.2 Nm.