Festo 8060571, Repair Instructions

Page: 40 / 52

40 / 52 Festo 7ELCC_TB_KFb_en
3. Screw in the socket head screw of the clamping and tighten slightly.
4.
Mount the second end cap in the same way as the first.
5. Only for cantilever axes with feature P9
Mount the cover strip (

Chapter 5.4.2 on page 36 ).
6. Adjust the toothed belt pretension (  Chapter 5.1.4 on page 31 ).
5.7 Replacing the clamping component module
1. Carry out preparatory work (  Chapter 4.2 on page 23 ).
2. Remove the toothed belt from the clamping component modules (

Chapter 5.1.1 on page 25 ).
3.
Only for cantilever axes with feature P9
Remove cover strip from the end cap (

Chapter 5.4 on page 34 ).
4. Dismantle end cap (

Chapter 5.5 on page 39 ).
5. Pull the clamping component module out of the cylinder barrel module.
6. Push the new clamping component module into the cylinder barrel module.
7. Mount end cap (

Chapter 5.6 on page 39 ).
8.
Only for cantilever axes with feature P9
Mount the cover strip (  Chapter 5.9 on page 41 ).
9. Mount toothed belt (

Chapter 5.1.2 on page 27 ).
10. Adjust the toothed belt pretension (  Chapter 5.1.4 on page 31 ).
5.8 Replacing buffer elements
1. Use pliers to pull out the buffer elements.
2. Insert the new buffer elements.