Festo 558864, Operating Instructions Manual

Page: 27 / 32

EGC−...−FA−...
Festo EGC−...−FA−... 0807NH English
27
S
Grease the following components:
Bearing guide Guide rail
Lubrication point (
è
Fig.1) Lubrication hole
9
Surface
2
Lubrication interval è Fig.13 As necessary
1)
Grease
2)
Roller bearing grease
1) Or if the component no longer has a layer of grease
2) Grease gun, blast pipe and grease
è Chapter 9 Accessories"
Fig.12
To grease the bearing guide (not possible on EGC−.... −GP/GQ ):
1. Calculate the guide comparison number
F
ver
with the aid of the formula for com
bined loadings ( è chapter 11 Technical
data") and select the lubricating interval
S
int
from Fig.13.
2. Grease the bearing guide at both ends at
all lubrication holes
9
.
3. Move the along the entire path of travel
whilst greasing so that the grease is dis
tributed evenly.
8 Repairs
S
Recommendation: Return the EGC to our repair service for overhaul.
The necessary fine adjustments and tests will then be taken into account.
S
Information on spare parts and aids can be found under:
www.festo.com/spareparts
Fig.13
Fig.14
9