EGC−...−FA−...
Festo EGC−...−FA−... 0807NH English
20
S
Take the ambient conditions at the location of use into account.
Corrosive elements in the environment (e.g.ozone) will reduce the service life
of the product.
S
Please comply with national and local safety laws and regulations.
S
Remove transport packaging such as foils and cardboard. The packing is
intended for recycling (except for: oiled paper = other waste).
S
Only use the product in its original state, without any unauthorised modifications.
S
Note the warnings and instructions on the product and in the relevant operating
instructions.
S
Take the tolerance of the tightening torques into account. Without special specifi
cation, the tolerance is ±20%.
5
I
nstallation
Mechanical installation
S
Do not modify the settings of screws and threaded pins if there is no request to do
this in these operating instructions.
Installing the product:
Note
Heavy tensile loads may cause the screws in the cover to be pulled out.
S
Please note that in the case of heavy loadings the axis must not be
fastened only by the bearing cap.
Summary of Contents for 558864
Page 31: ...EGC FA Festo EGC FA 0807NH 31...
