Festo 548076, Repair Instructions, Page: 57 / 92

57 / 92 Festo 7DHTGd_en
DHTG-65 / 90-A-P4 / P4E4 / P4L12
6. Unscrew grub screw from plate only if damaged.
DHTG-140 / 220-A-P4 / P4E4 / P4L12
7. Unscrew grub screw from adapter only if damaged.
8. Unscrew the socket head screws (2×) from the adapter.
9. Remove adapter.
10. Remove O-ring from the adapter.
All energy throughfeeds
11. Mounting the rotary distributor

Chapter 4.6.2 on page 86 .
4.3.2 Dismantling of the pneumatic and electrical module
An electrical module is additionally mounted on the pneumatic module of the P4E4 / P4L12 versions.
The pneumatic module with the air pipe module cannot be dismantled from the DHTG-65-…-A-P4E4 and DHTG-65-…-A-
P4L12.
In the event of a pneumatic module defect, contact the regional Festo contact (

www.festo.com ).
When removing from the housing of the pneumatic module, the centring
sleeves (2×) can become lost.
1. Unscrew socket head screws (4×) from the housing of the pneumatic
module.
2. Carefully remove the housing of the pneumatic module together with the
electrical module (if included) and the air pipe module from the rotary
indexing table.
3. Mounting of the pneumatic module together with the electrical module
 Chapter 4.6.1 on page 86 .