DAPZ−...−AR
Festo DAPZ−...−AR 0512a English
30
5. Connect the control cable.
S
For connecting the upper switch
observe the circuit diagram with the
pin numbers 1, 2 and 3.
S
For connecting the lower switch
observe the circuit diagram with the
pin numbers 4, 5 and 6.
6. Replace the mounting plate with the recess
1
facing the cable through hole.
Fig.18
Fig.19
2
1
3
Please note
The red ring is turned by the cam shaft.
S
Make sure that the cables are laid so that the movements of the red ring and
the green ring are not impaired.
7. Tighten the fastening screw
3
for the mounting plate by hand.
8. Tighten the union nut
2
of the cable through hole.
Max. tightening torque: 5 Nm
Fig.17
Summary of Contents for 534474
Page 111: ...DAPZ AR Festo DAPZ AR 0512a 111 ...
